c30 doesn't work with mplab 7.60

[macrace]

hi all,
I have a problem with c30 C compiler. like you all know, we use the serial "MTI035248989" for c30 up to now. but few days ago, I uninstaled mplab 7.50 and c30 3.0 and installed mplab 7.60 and c30 3.01. but c30 doesnt accept this serial. later, I uninstaled 7.60 and intalled 7.50 again, but I couldnt solve this problem.
could you help me please.? what should I do?

[mitsos]

hi
write something in name and company
I test the serial and the setup continue after that

regards
mitsos

[macrace]

hi mtsos, fistly thanks in advance.
name: macrace
company: kou

I think you will try to find a serial for these above. if you can perform c30,I will be very pleased, because with mplab 7.60 extra newness I need. thanks in advance.

[macrace]

pardon for this, I think I misunderstood you mitsos.
like you told, setup continues. But there is a problem during compiling the source code. I have a warning that is this is unlinced.

[mitsos]

Hi again
before a little I setup MPLAB 7.60 and compiler C30 v3.01 with serial: MTI030340303
I sent this serial to this forum in the past, but I believe the other one is ok
finally I build the pid example and all is ok, here the report:
Executing: "C:\Program Files\Microchip\MPLAB C30\bin\pic30-bin2hex.exe" "C:\Program Files\Microchip\MPLAB C30\examples\dsPIC30F\CE019_PID\hex\CodeExample.cof"
Loaded C:\Program Files\Microchip\MPLAB C30\examples\dsPIC30F\CE019_PID\hex\CodeExample.cof.
BUILD SUCCEEDED: Mon Jul 09 11:57:01 2007

something else is your problem
regards
mitsos