Looking for Fluke 8000A/mAs DMM addendum with mAs board schematics

[kreutz]

Hello;
Recently I acquired a Fluke 8000A/mAs multimeter and the main reasoning behind this acquisition was the mAs (milliampere-second) measuring function. The problem is: this this board is not working properly!.
I searched the internet looking for the specific 8000A/mAs option manual but every other option (battery, 10A, Low Ohms) is available except for this one. There are some calibration instructions on the web but I need the schematics for the mAs board and the interconnections to the main multimeter's board and switches.

Your help will be sincerely appreciated.

kreutz

[Sideshow Bob]

Hello;
Recently I acquired a Fluke 8000A/mAs multimeter and the main reasoning behind this acquisition was the mAs (milliampere-second) measuring function. The problem is: this this board is not working properly!.
I searched the internet looking for the specific 8000A/mAs option manual but every other option (battery, 10A, Low Ohms) is available except for this one. There are some calibration instructions on the web but I need the schematics for the mAs board and the interconnections to the main multimeter's board and switches.

Your help will be sincerely appreciated.

kreutz

Will this be of some help
https://archive.org/details/FLUKE_8000a/page/n45/mode/2up

[kreutz]

I had already downloaded this manual, but it is missing the mAs option info. I'll keep on looking around, hopefully somebody still has it...

Regards,

kreutz

[PM3295]

I have emailed Fluke support in the past to help with some obsolete equipment service information. They responded and emailed me some PDFs. It may vary from region to region, but it may be worth a try.

[kreutz]

I will try.

Regards.

 kreutz

[kreutz]

No response from Fluke yet...