STC15L204 + NRF24L01

[Marcustv]

I purchased the following product
http://www.aliexpress.com/item/STC15L204-NRF24L01-wireless-interface-wireless-driver-board-development-board/1996335980.html

Unfortunately I can not get it to work not finding information.
Have any of you tested it and knows how to use it

[micropcb]

Hello,
Some information and further links are available at
http://forum.arduino.cc/index.php?topic=257091.0

Hope it helps you.

Cheers.

[Old_but_Alive]

I hope you bought 2 of these, otherwise you wont have  a link.

If the STC15L204 is just converting UART data to SPI, then use the NRLF24L01 registers and commands and instead of sending them down the  SPI, just send serial data ( baud rate to be determined !!)

there seems to be loads of info if you just google

[Marcustv]

I have 2 of these modules, but you can not connect in any way.
To connect the UART of 'STC15L204 how fast should I set it to connect serial.
I tried it at 9600 8N1 but nothing to do, I increased to 115200 .. nothing

Posted on: November 21, 2014, 06:40:17 06:40 - Automerged

The RF24L01 module is operating normally and can establish communication with Arduino and the SPI.
However, if I try to connect with the serial to 'ST15L204, nothing to do

[pablo2048]

I have 2 of these modules, but you can not connect in any way.
To connect the UART of 'STC15L204 how fast should I set it to connect serial.
I tried it at 9600 8N1 but nothing to do, I increased to 115200 .. nothing

Posted on: November 21, 2014, 06:40:17 06:40 - Automerged

The RF24L01 module is operating normally and can establish communication with Arduino and the SPI.
However, if I try to connect with the serial to 'ST15L204, nothing to do

Have You read this: http://jjmz.free.fr/?p=179 ?

[jjmz]

Hi,

I am running the jjmz.free.fr website you have mentioned in the previous post.

To my knowledge and unless I really missed something,  the stc15l204 modules don't come with a pre-programmed firmware, thus you would need to program your own uart-to-nrf24l01 code (and related api/protocol).

JJ

[Marcustv]

At this point I also think that the STC15L204 is not supplied already programmed to manage the serial / SPI for the NRF24L01 comunication 

[myheadhurts]

In 2013 , I downloaded the source code for the nrf24l01_STC12LE5a16 modules.

I've attached it in case it may be of value to you.

Rob