Mikroc - Need help with ext eeprom access?

[jaikumar]

Using eeprom 24c08 with pic 16f684 portc bits for sda and scl. Mikroc software i2c library

    Soft_I2C_Config(&PORTC,5,4);
    Soft_I2C_Start();
    Soft_I2C_Write(0xA0);
    Soft_I2C_Write(0x01);  // high byte
    Soft_I2C_Write(0xC0); // Low byte
    Soft_I2C_Start();
    Soft_I2C_Write(0xA1);
    eeres = Soft_I2C_Read(0u);
    Soft_I2C_Stop();

Iam able to get data if only for a byte address. but when i want to access word address this program fails? Why?

[jaikumar]

ANSWER
24C08 has 8192 Bits = 8192/8 = 1024 Bytes
24C08 has address A and the bit 0 is used to access the first 1024/4 = 256 bytes and A2 to access the next 256 and so on.

GoodLuck.