PIC Project for advanced user with PIC18F452 and PIC18F877A

[zokij]

PIC Project for advanced user with PIC18F452 and PIC18F877A

Autor:Michael Sung
autor page: http://web.media.mit.edu/~msung/sak2.php

SAK2 Sensor Hub and Interface Board

Specifications:

PIC18F452 40-Mhz PIC microcontroller (up to 10 MIPS) 16-bit processor with 32KB FLASH program memory, 1.536 KB RAM , 256 Bytes EEPROM. This processor is equipped with a full set of analog (10-bit) and digital inputs, on-board hardware multiplier, timers, compare/capture/PWM modules, in-system flash programming, and is supported by a wide range of development tools.

BioSense Physiologic Sensing and Interface Board

BioSense Daughterboard Specifications:

PIC18F877A 20-Mhz PIC microcontroller 14-bit processor with 8KB FLASH program memory, 3 Bytes RAM , 256 Bytes EEPROM. This processor is equipped with a full set of analog (10-bit) and digital inputs, on-board hardware multiplier, timers, compare/capture/PWM modules, in-system flash programming, and is supported by a wide range of development tools.

ALL project files:

http://rapidshare.com/files/118070247/018.rar

pass: sonsivri

[arash_tah]

HI zokij
that would be great
the file was deleted could u upload again plz
best for u

[beque]

All of the files can be found in

http://web.media.mit.edu/~msung/sak2.php (Resources)

or below in zip format:

http://rapidshare.com/files/128092922/PIC_Sensor_Hub_and_Interface.zip.html