Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2024, 10:47:21 10:47


Login with username, password and session length


Pages: [1]
Print
Author Topic: Notebook PSU replacement  (Read 3168 times)
0 Members and 1 Guest are viewing this topic.
free
Active Member
***
Offline Offline

Posts: 115

Thank You
-Given: 71
-Receive: 13


« on: August 02, 2008, 12:21:48 00:21 »

hi friends,

I had an old Compag notebook and the PSU was damage.It's very expensive to replace with compaq part.
Spec compag PSU : output 18.5v 3.5A.
On the other side I had an unused Acer PSU with spec : output 19v 3.4A.
What do you think if I replace it with Acer PSU ?
It is possible to make battery management circuit unproperly working and damage the battery?
 
Logged

Some dream to escape reality, some to change it forever.
- Soichiro Honda -
rmmrmm
Junior Member
**
Offline Offline

Posts: 65

Thank You
-Given: 1
-Receive: 24


« Reply #1 on: August 02, 2008, 03:56:45 15:56 »

You are lucky having a second PSU.
The voltage diference is minimal , just check the polarity and add a 3A silicon diode between the PSU and the Laptop , you will get a constant 0,6 to 0,7 Volt of dropout in the silicon .
Logged
pickit2
Moderator
Hero Member
*****
Offline Offline

Posts: 4668

Thank You
-Given: 834
-Receive: 4322


There is no evidence that I muted SoNsIvRi


« Reply #2 on: August 03, 2008, 03:08:34 15:08 »

I have two Sony Laptop power supply units both rated at 19v 3.42A same model no. for each unit.
one gives out 20v and the other 18.2v so I belive it's not that tight a control for the output voltage.
Logged

Note: I stoped Muteing bad members OK I now put thier account in sleep mode
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC