Ethernet 18fxxj60

[odsk]

Hi,
I am looking for exmaples using MikroC and the PIC in subject.

I looked to the example under "MikroC help" but I am still confised.
For example Send User UDP  or TCP functions, what if I want to receive data in them but when sending I use other functions (example putbyte).

Waiting for your help Gents,
ODSK

[wkleong]

Try using example from Microchip Demo. Make sure you establish a connection using proper IP address and port # . If your board is a client then you have to initiate a connection to a TCP server with known IP address and port #. The port must be in listening mode. For client mode check out code sample in GenericTCPClient.c for the receiving part.  Best way to test if you can create a TCP server at PC side . If you know Visual Basic 6 you can learn all the fundamental of TCPIP connection using Winsock component