REQ : USB to floppy driver ?

[smainj]

Hi
i like to repalce the old floppy driver in the machine by USB flash memory
i try some ready production but don't work with my needed machine
(the machine is ZSK MSCD broderie machine)
 driver like this:





i like add to   old driver circuit will emult   disk
  Head motor will select address and Head set send the logical level


how i can make this and pls if anyone know somthing about that shar it
thank you

[Sideshow Bob]

What kind of OS does the ZSK MSCD broderie machine use? I do not know if it will help. But I have a DOS USB memory stick driver somplace. Used it then I was working on windows CE

[pickit2]

Hi
i like to repalce the old floppy driver in the machine by USB flash memory
i try some ready production but don't work with my needed machine
(the machine is ZSK MSCD broderie machine)
i like add to   old driver circuit will emult   disk
  Head motor will select address and Head set send the logical level

how i can make this and pls if anyone know somthing about that shar it
thank you

http://creating-industrial-solutions.com/2009/07/price-reduction-usb-floppy-emulator/
At a cost of 249.00 EUR or $345.17 US I would buy a standard floppy, but then if you have a usb port on your machine,
try a usb-pen drive or even a true usb floppy, at a  cost of less than £10..

[smainj]

What kind of OS does the ZSK MSCD broderie machine use? I do not know if it will help. But I have a DOS USB memory stick driver somplace. Used it then I was working on windows CE

OS  is MS-DOS 3.11

Posted on: October 24, 2010, 01:07:50 13:07 - Automerged

http://creating-industrial-solutions.com/2009/07/price-reduction-usb-floppy-emulator/
At a cost of 249.00 EUR or $345.17 US I would buy a standard floppy, but then if you have a usb port on your machine,
try a usb-pen drive or even a true usb floppy, at a  cost of less than £10..

the standart floppy driver don't work with machine only TEAC FD-235HF (100$) work
and floppy disk is hard to find and is expensive

[Sideshow Bob]

What do you need floppy for by the way?

[technovm]

Check out this website: http://torlus.com/floppy/
may be useful.

[DreamCat]

why not use software to arrive this?
could you tell us what kind usage must use hardware emulator?

there is many way can help you . (to resolve your problem?)

[technovm]

I have seen old cnc machines(excellon automation co.) used for pcb drilling have a floppy drive to firmware and nc files. they offer floppy emulator but it is too expensive.